Skip to main content

Morpheus XL Change-Over

The Morpheus XL is part of the Matrix Morpheus Series, machines that utilize a servo-driven continuous box motion bagger. This completely configurable solution offers options for small and large bags. The high-speed jaw system allows for maximum dwell time on sealing and allows for faster speeds and accuracy. The AutoPro is standard on the machine series and helps decrease change-over time by 50%. Series can support bags sizes from 2.75” to 15” in width and up to 20” in length. Watch the video and see how efficiently your operator can complete a change-over.

Additional Videos

Matrix Mercury Change-Over

Watch a change-over completed in less than 5 minutes, changing from producing a 6” pillow bag to a 4” pillow bag is simple and seamless on the Matrix Mercury.

Matrix Material Handling Lift

The Matrix Material Handling Film Lift works to make changing film quicker, easier and safer! Light weight, this system reduced back strain and creates efficiency.

How to Series- Product Timing

In this episode, Jesse shows viewers how to fine-tune the product timing on your machine. He explains his method for, and how to adjust the film pull setting to optimize product placement.

How to Series- Setting Film Pull Belts

In this episode, Jesse shares expertise on how to set up the film pull belts, guiding viewers through disabling the vacuum and precisely adjusting the belts' position. Jesse demonstrates achieving the ideal gap between the pull belt and forming tube to ensure smooth film pulling without friction, thereby preventing packaging issues.

How to Series: Setting Back Seal Pressure

In this episode, Jesse explains how to perfect back seal pressure on your machine. Jesse guides viewers through adjusting the vertical seal bar's pressure to achieve flawless seals in packaging operations. By emphasizing careful monitoring and accuracy in pressure settings, Jesse demonstrates how operators can ensure consistent seal quality, avoiding common issues like leaks or weak seals.

How to Series: Setting Film Tension

In this episode, Jesse talks about setting film tension. Jesse shares his method for optimizing film tension on packaging machines, beginning with maximizing tension through strategic placement of weights and springs at their outermost limits. He emphasizes the importance of providing sufficient back pull to maintain straight film and adjusting stopper screws to accommodate the dancer bar's movement.

How to Series: Pull Belts

In this episode, Jesse shows how to optimize pull belt tension on packaging machines. Jesse underscores the significance of balancing tension across belts and illustrates how to adjust it using the black knobs to achieve optimal tension without inducing excessive friction.

How to Series: Back Seal Alignment

In this episode, Jesse shows the process for aligning the back seal of your machine for optimal performance. Demonstrating how to adjust the left and right positions of the back seal bar, ensuring parallel alignment to the film. By carefully monitoring the movement of the seal band and making incremental adjustments, Jesse ensures that the back seal is positioned just right for reliable sealing.

How to Series: Optimizing your MVC-300 Vertical Form Fill Seal Bagger

In this episode, Jesse addresses key operational issues and provides effective solutions for smooth performance. Jesse emphasizes the critical role of maintaining optimal tension on film pull belts to prevent slack and misalignment, which can lead to inefficiencies and product wastage.